Setting up your antenna in 4 easy steps:
- Tighten the arms if needed, so they are firm but not rigid.
- Set the arms at 10 and 2 o’clock and plug into your TV or via your amplifier.
- Run an auto scan to see how many digital TV stations you are getting.
- Turn the antenna to receive the signal from the repeater.
NOTE: If your TV says you have stations and you can’t see them on your TV, start changing the element arms (take the antenna down to do this) until you find your happy medium (and then put the antenna back up). When you are happy with the reception you may like to do another auto tune to see if you can get a few more stations.